Back to the top

John Deere Test Products

John Deere Test Bolts, Nuts & Washers

Wilson-Garner is proud to manufacture and stock test bolts, nuts, and washers that meet John Deere’s standards for torque-tension testing. With test products in stock, we can make sure you get the quality pieces you need to complete your testing properly. As an experienced special fastener manufacturer, we understand how important it is to ensure consistency across every test product. When you choose Wilson-Garner for your John Deere test products, you can rest assured you’ll receive accurate results, test after test.

Wilson-Garner products are American-made and suitable for torque-tension testing based on John Deere’s Engineering Standard JDM F15. Our parts conform to the following standards:

JDM F15 | ISO 16047 | ISO 4014

John Deere Test Products Available from Stock

Test Bolt Part NumberTest Nut Part NumberTest Washer Part Number
HHM10150060-WZ10211611982NPN4
M10X1.50X60MM PC10.9 Plain FinishM10X1.50 Class 10 Nut Plain FinishM10 Square Hardened Washer Plain Finish
Test Bolt Part Number
HHM10150060-WZ102
M10X1.50X60MM PC10.9 Plain Finish
Test Nut Part Number
11611982
M10X1.50 Class 10 Nut Plain Finish
Test Washer Part Number
NPN4
M10 Square Hardened Washer Plain Finish

John Deere Test Bolt: HHM10150060-WZ102

M10 X 1.50 X 60MM PC10.9 Hex Head ISO 16047 / John Deere JDM F15 Test Bolt Plain

This M10 plain PC 10.9 test bolt has a slightly larger head than a regular M10 test bolt. The head flats measure 16mm across. It is suitable for use in torque-tension and bearing surface characteristics tests performed to the following specs:

  • ISO 16047
  • ISO 2320
  • John Deere JDM F15

SKU: HHM10150060-WZ102
Alt. Part Number: HHM10150060-ISO4014

John Deere Test Nut: 11611982

M10 X 1.50 Class 10 ISO 16047 / John Deere Hex Test Nut Plain

This M10 class 10 test nut has a plain finish and is suitable for use in torque-tension and coefficient of friction tests performed to the following specs:

  • ISO 16047
  • John Deere JDM F15

SKU: 11611982

John Deere Test Washer: NPN4

M10 Square Test Washer Plain Type HH

This M10 Type HH test washer has a plain finish and is suitable for use in torque/tension and coefficient of friction tests performed to the following specs:

  • ISO 16047
  • ISO 2320
  • John Deere JDM F15

SKU: NPN4